Fischels Warehouse Site Design, Waterloo, Iowa CGA was hired by 3 Stooges, LLC, to provide civil engineering and land surveying services for the new Fischels Warehouse located on Hyper Drive in Waterloo, Iowa. This project involved the design and development of a proposed 9,000 sf industrial warehouse. Highlights: Site Survey & Design: Crafted design blueprints…
Magnum Trucking Site Design, Waterloo, Iowa CGA provided civil engineering and land surveying services for the new Magnum Trucking Site Design located in Waterloo, Iowa. This project revolved around the design and development of a proposed industrial facility measuring approximately 70’x200’. Highlights: Site Survey & Design: Developed layouts for parking, vehicular areas, sidewalks, gravel storage,…
CGA provided site design for this design-build project to add a 1500 SF addition to an existing dental office. Site work included a 10-stall parking lot addition, new pedestrian access, stormwater calculations, and city approval process. CGA’s scope also included partial topographic and boundary surveys as well as construction staking.
Lincolnshire Addition is a newly built residential subdivision located between Monticello Avenue and Meadow Lane in Waterloo; SW of the Ridgeway/Ansborough intersection behind Cedar Valley Community Church. CGA completed the boundary/site survey, topographic survey and subdivision plat. Our design role consisted of site grading, sanitary sewer, water main, storm sewer, and paving. We were also…
CGA assisted the City of Waterloo with the extension of sanitary and water main north along Leversee Road to service a new industrial subdivision. CGA performed site boundary and topographical surveys as well as design services. This project also included the coordination of Runway 6-24 closure at the Waterloo Regional Airport, as well as preparation…
CGA assisted the City of Marshalltown in developing a subdivision in a strip of undeveloped land along a major collector in town. With the subdivision, the City was not only able to set-up for the development of more housing in the area but also provide a second access point to an existing development containing 68…
CGA worked with the City of Conrad to develop a 20-acre piece of land for a mix of 50 lots consisting of single-family residential and multi-family/duplex homes. The development is bond-funded and CGA has completed the initial boundary survey, topo survey, infrastructure design, and assisted the City during the construction phase by performing construction observation,…
CGA completed a boundary survey for the Ultimate Auto Car Wash, followed by an analysis and design for the new soldier pile retaining wall that was to replace the old deteriorated wooden retaining wall. CGA worked with local utility companies to identify different utilities and easements on the site so that they could be avoided…
CGA partnered with TSP Architects on this DAS project to deliver plans to the VA Hospital in order to bring the Mission Critical Facility into compliance with the VA security standards. The team reconfigured vehicle and pedestrian access points to the facility in order to install decorative fencing around the site perimeter with electronic gates…
